Nexus-21 NX2 Manual do Utilizador

Server Installation and Operation Manual English Installation and Operation Manual English

SERVER Note: If the cable must be cut, it is recommended it is cut at the unmarked cable end, since a marked cable is easier to identify. When all c

SERVER 2.4 Connecting optional accessories These optional accessories are available from your local Nexus Dealer. (For a more complete list of acce

SERVER buzzer will sound as soon as any alarm function is activated in the Nexus Network. Red wire to Server pin 9 (+ 12V ). Or 12V from switch pan

SERVER 2.5 Connecting instrument lighting The instrument lighting can be controlled from the boats general lighting switch. Connect the wire from

SERVER Note! A Laptop PC may have a GPS PCMCIA card installed and deliver position and time data. However, if the same data is coming in on port A wh

SERVER Note c: If the NMEA instrument has only one output cable, put a ”bridge” cable on the Server between pins 11 (INPUT B) and 12 (0V GND). 2.8

SERVER 2.9 Compatibility with our previous transducers 2.9.1 Log transducer All our log transducers (except the transducers from the S-2000 and S-

SERVER 2.9.3 Wind transducer All our wind transducers can be used. 2.9.4 Compass transducer Only the Nexus version can be used. Compass transduce

SERVER 2.9.6 NMEA transducers NMEA compass, NMEA wind, NMEA log and NMEA depth transducer may be used. GreenYellowWhiteScreen You must know which 2

SERVER 2.10 NMEA 2.10.1 Transmit NMEA sentences OUT from Server Calibration code C77 to C92 contains 16 NMEA slots The Server supports 29 differen

SERVER 1

SERVER Example of NMEA sentences: $IIAPA,A,A,00.007,L,N,V,V,145.03,M,004 $IIAPB,A,A,00.007,L,N,V,V,147.53,T,004,147.52,T,,T*29 $IIBOD,147.53,T,145.0

SERVER To double the transmission speed, select a NMEA sentence 2 times with 7 slots apart, that is the slots should be as far away from each other

SERVER VDR Set & drift VHW Water speed and heading VWR Relative wind speed and direction WPL Waypoint location Not yet implemented VTG Cours

SERVER 2.11 Special NMEA sentences The Server can read 2 special NMEA sentences which can be send from a PC. One contains TBS (target boat speed),

SERVER 3 Maintenance and fault finding 3.1 Maintenance • To clean the instrument, use only mild soap solution and rinse with water. • Do not us

SERVER 3.2.2 Fault - action 1. Speed and distance functions: No reading ( --- ) - C95 (COG) should be OFF, if no navigator is connected. The se

SERVER With a the built in fault finding LED’s, you can check that the signals from channel A and B are correct. The LED is flashing very fast with 1

SERVER If the LED is constantly off, check the connections. Or the mounting of the transducer. 2. Unstable or erratic readings. Can happen in the f

SERVER 4 Specifications 4.1 Technical specifications Dimensions: Server: 110 x 165 x 30 mm. (4.3x6.5x1.2 inch) Instrument cable: 8 m (26 ft).

SERVER 4.3 Optional Accessories Below find a selection of optional accessories available. Please contact your local NX2 dealer for more information

SERVER This manual is written for NX2 Server version 2.00 – 5.4 Edition: March 2007 2

SERVER Nexus Multi XL 21680-1 Multi XL instrument, 4m cable (RCI or Multi Center needed to control Multi XL) 21684-1 Multi XL Set, Multi XL inst

SERVER 5 Warranty WARRANTY GENERAL All our products are designed and built to comply to the highest class industry standards. If the products

SERVER File id: WARRANTY CARD TO BE RETURNED TO YOUR NATIONAL DISTRIBUTOR OWNER: Name: Street : City/Zip Code : Country: Product name: Se

SERVER 32 28415-1 Edition 1 22172-1 Edition 5 Copyright ©: Nexus Marine AB Kuskvägen 4, 191 62 Sollentuna, Sweden Tel: +46 -(0) 8 – 506 939 00.

SERVER 1 Part specification ...4 2 Installation ...

SERVER 1 Part specification ___________________________________________________________ Items delivered with the Server Qty. Description 1 N

SERVER Welcome aboard the Nexus Network! Thank you for choosing NX2 and welcome to the world of the Nexus Network. Through this manual we would

SERVER Typical NX2 system: The NX2 Server is equipped with fault finding LED:s. For more information, see chapter 3.2.2 6

SERVER 2 Installation • The installation includes 6 major steps: 1. Read the installation and operation manual. 2. Plan where to install the tra

SERVER 2.1 Location of the Server The Server must be mounted on a dry, flat and vertical surface below deck , at least 500 mm (20") from rad